Jourmind 30A 12V /24V Solar Charge Controller PWM Charge Regulator

Solar Battery Charge Controller manages the power going into the battery bank from the solar array to ensure that the deep cyclebatteries are not overcharged, and that the power doesn’t run backwards to the solar panels overnight and drain the batteries.Solar panel suitable for solar system, solar street lamp, smart home, solar light box, intelligent irrigation,camping lantern etc.The solar regulator is only suitable for lead acid batteries:OPEN, not for nickel hydride, lithium, Liions, or other batteries. 
Features

1.Discharge Current: 30A,build-in industrial micro controller, automatically manage the working of solar panel and battery in

solar system. Dual USB output 5V/2.5A (max), to support mobile phone charging.

2.Multiple Protection Functions: This controller has short-circuit protection, open-circuit protection,reverse protection,

over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery.

3.Battery Type: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GE*L, it is not suited for nickel

hydride,lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop

below 8V, the solar controller will turn off automatically.

4.LCD Display: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes

andparameter configuration, suitable for home, industrial, commercial etc.

5.Easy to Install and Operate: The charge controller should connect the battery first, then the solar panel, and finally the load!

6.The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production.

7.Note: Thecharge controller will heat up when it is running. Please be careful to install the charger controller on a flat,

well-ventilated place)

 

 Package Contents:1 * Solar Panels Battery Charge Controller (Batteries Not Included)Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such asbrightness of your monitor and light brightness.

Use Tips

1.First Connect the positive and negative poles of the battery into the controller as shown in the figure, and the controller will automatically detect the battery voltage.2.After the load is closed, connect the positive and negative poles of the load to the controller as shown in the figure, pay attention not to reverse connection, and open the load after connecting.3.Connect the solar panel to the controller as shown in the figure.4.Wire removal standard: first remove the solar panel, then the battery, and finally the load.