Solar Charger Controller 12V / 24V Rated Current 30A

Solar Charger Controller 12V / 24V Rated Current 30A:
Product description:
The Solar Charger Controller is a 30A controller designed for solar panels and batteries. It uses PWM technology and has an intelligent regulator with an adjustable LCD display. The controller is made of ABS material and features dual USB interfaces. It is suitable for 12V and 24V power systems.

Key Features:
– The controller has built-in industrial microcontroller for efficient performance.
– It has a one-key configuration and digital display with automatic memory function.
– The controller offers fully pwm-load management load.
– It provides protection against short circuits, open circuits, reverse polarity, and overloads.
– It has dual mosfet reverse current protection with low heat production.

Installation:
To install the controller, ensure that the battery has enough voltage for the controller to recognize its type. Keep the battery cable as short as possible to minimize power losses. The controller is suitable for lead-acid batteries (OPEN, AGM, GEL) and not suitable for other battery types. Connect the battery and photovoltaic modules to the controller according to the provided diagram. Connect the load to the controller. Make sure to follow the correct sequence to avoid damaging the controller.

Notes:
– The actual color of the item may vary slightly from the pictures due to monitor and light effects.
– Please allow a measuring deviation of 1-3cm due to manual measurement.

Product Connection Mode:
1. Connect the positive and negative terminals of the battery to the controller as shown in the diagram.
2. Connect the positive and negative terminals of the load to the controller, ensuring correct polarity.
3. Connect the solar panel to the controller following the diagram.

Setting Parameters:
In the interface 2-5, long press the up key for 5 seconds to restore default values. Press and hold the menu key for 5 seconds to enter manual setting mode. Adjust the parameter values using the up and down keys, and then press the menu key for 5 seconds to exit the setting.

Note:
– On the main interface, press the flip key to turn the load on/off.
– In interface 5, choose the load working mode (24h) for normal operation.